I am not able to bypass any zones

I am not able to bypass any zones

On DSC and IDS:
Ensure the master code been entered into the app?
On All panels
Ensure bypass been enabled by the installer for the zones and areas?

    • Related Articles

    • What is the difference between stay, sleep & bypass?

      [Stay] and [Sleep] are types of bypass settings; they are predetermined bypasses set by the installer on a panel as per end user specifications as a custom selection of activation zones whilst the areas are armed. In other words, [Stay] and [Sleep] ...
    • What is the difference between bypass and disarm?

      [Bypass] is a setting that allows access to a customise zones whilst area is armed without triggering the alarm; this is applied on a zone level. [Disarm] is a setting to turn off the alarm when an armed area has been triggered; this is applied on an ...
    • I only see 16 zones but I have more

      Go to the [Settings] “3 dots” Then go to [Olarm Setup] Tap on [Zones] Set amount of zones Then tap save
    • What is [Bypass]?

      Bypassing a zone allows the end user to temporarily disable a zone while the system is armed, in the event that the zone is causing problems or that the client would like to move around the house while the system is armed without triggering an alarm. ...
    • Can my panel pull zones labels?

      Paradox: Only Paradox panels support label fetching if the zone/area labels have been added by the installer to the panel Go to [Setting > Olarm Setup > Fetch Zone Labels] This will take a few minutes. Other panels: IDS, DSC and Texecom the labels ...