Device Management
Updating your Olarm Firmware
Firmware updates can only be done by the Primary User of the Olarm Keep your Olarms Firmware up to date by simply following the steps listed below. Select the Olarm you would like to update Tap on the menu button in the top right corner Tap on Device ...
Setting the Master/Keypad Code
Setting the Master/Keypad Code Open the App Select the Olarm your would like to set the code for Tap on the Settings tab Tap on Device Setup Tap on the Master/Keypad button Type in the code Tap Save Only the Primary user will have the option of ...
How to connect my Olarm to Wi-Fi using WPS Mode?
Connecting your Olarm to Wi-Fi using WPS Mode You can now connect your Olarm PRO to your Wi-Fi network using the WPS Mode, please note only 2.4Ghz Wi-Fi Networks are supported On your WPS capable Router Press the WPS mode button on the Wi-Fi router ...
Olarm PRO 4G
Olarm PRO 4G The Olarm PRO now provides even better connectivity with support for 4G. 4G (also known as LTE) provides substantial performance improvements over previous mobile technologies, and our 4G device is designed to offer connectivity ...
How do I remove an Olarm from my profile?
There are 2 different ways of removing devices depending on your level of access: Devices where you are the primary user Devices where you are sharing as the secondary user Removing device as primary user Go to Settings by taping on the 2 lines on ...
How do I add a device to my app?
Adding a devices using the device menu dropdown Tap on the device dropdown menu. Tap on "+". Scan the QR Code at the back of the Olarm Or enter the devices serial number and verification code located at the back of the Olarm Name your Olarm Tap on ...
How do I add or change zone and area labels?
Please not that only the Primary user of the Olarm is able to make changes to the Olarm. To make changes to your zone labels, follow the steps below: Go to Settings by taping on the 3 lines on the top right corner of the Olarm App. Tap on the zones, ...
Can my panel pull zones labels?
Paradox: Only Paradox panels support label fetching if the zone/area labels have been added by the installer to the alarm system. On your Olarm App, follow these steps to fetch your alarm systems labels. Tap on the 3 lines in the top right corner of ...
How do I change the amount of Zones and Areas showing in the Olarm App?
Pease not that only the Primary user of the Olarm is able to make changes to the Olarm. To changes to amount of zones displaying in the Olarm App, follow the steps below: Go to Settings by taping on the 3 lines on the top right corner of the Olarm ...
How to set up the WiFi connection?
Once the Olarm PRO has been added to your Olarm App, you will have a banner at the top prompting for WiFi Setup, alternatively you can also navigate to Settings, Tapping on the 3 lines in the top right corner of the Olarm App. Then tap WiFi Setup. ...
I'm not getting notifications
Some phone manufacturers try to optimize battery usage by restricting the permissions of installed Apps. Below are some common issues picked up, The app will not receive Olarm app notifications if the app is open In the Olarm app, make sure that the ...